lower stress bar

[jlagnese at massed.net (John S. Lagnese)]

I thread the 19 mm bolts back in to make sure things remain aligned.
John
----- Original Message ----- 
From: <julie@xxxxxxxxxxxxxxxxxx>
To: "Chris Bennett" <scirocco16vr32@xxxxxxxxx>; "Scirocco List" 
<scirocco-l@xxxxxxxxxxxx>
Sent: Sunday, June 24, 2007 4:46 PM
Subject: Re: lower stress bar


> 19mm for the 2 main bolts and 13's for the smaller. So Yup, it has to come 
> out.
>
>>-----Original Message-----
>>From: Chris Bennett [mailto:scirocco16vr32@xxxxxxxxx]
>>Sent: Sunday, June 24, 2007 04:16 PM
>>To: 'Scirocco List'
>>Subject: lower stress bar
>>
>>Bentley doesn't say it but the lower stress bar has to come out for the
>>tranny?
>>
>>-- 
>>80 Scirocco Callaway Indiana Red
>>87 Scirocco 16v Tornado Red
>>04 R32 Reflex Silver
>>_______________________________________________
>>Scirocco-l mailing list
>>Scirocco-l@xxxxxxxxxxxx
>>http://neubayern.net/mailman/listinfo/scirocco-l
>>
> _______________________________________________
> Scirocco-l mailing list
> Scirocco-l@xxxxxxxxxxxx
> http://neubayern.net/mailman/listinfo/scirocco-l
>