lower stress bar

[koabi.brooks at gmail.com (Koabi Brooks)]

i just did this yesterday and they will become a bit off if you dont do
that.  ask me how i know ;)

On 6/25/07, John S. Lagnese <jlagnese@xxxxxxxxxx> wrote:
>
> I thread the 19 mm bolts back in to make sure things remain aligned.
> John
> ----- Original Message -----
> From: <julie@xxxxxxxxxxxxxxxxxx>
> To: "Chris Bennett" <scirocco16vr32@xxxxxxxxx>; "Scirocco List"
> <scirocco-l@xxxxxxxxxxxx>
> Sent: Sunday, June 24, 2007 4:46 PM
> Subject: Re: lower stress bar
>
>
> > 19mm for the 2 main bolts and 13's for the smaller. So Yup, it has to
> come
> > out.
> >
> >>-----Original Message-----
> >>From: Chris Bennett [mailto:scirocco16vr32@xxxxxxxxx]
> >>Sent: Sunday, June 24, 2007 04:16 PM
> >>To: 'Scirocco List'
> >>Subject: lower stress bar
> >>
> >>Bentley doesn't say it but the lower stress bar has to come out for the
> >>tranny?
> >>
> >>--
> >>80 Scirocco Callaway Indiana Red
> >>87 Scirocco 16v Tornado Red
> >>04 R32 Reflex Silver
> >>_______________________________________________
> >>Scirocco-l mailing list
> >>Scirocco-l@xxxxxxxxxxxx
> >>http://neubayern.net/mailman/listinfo/scirocco-l
> >>
> > _______________________________________________
> > Scirocco-l mailing list
> > Scirocco-l@xxxxxxxxxxxx
> > http://neubayern.net/mailman/listinfo/scirocco-l
> >
>
> _______________________________________________
> Scirocco-l mailing list
> Scirocco-l@xxxxxxxxxxxx
> http://neubayern.net/mailman/listinfo/scirocco-l
>