MkI coolant temp guage with 2 prong ABA sensor

[roccit_53 at scirocco.cs.uoguelph.ca (C Boyko)]

Hey, don't distract me, I'm marking.
And why do you think there's all that space cleared out near the firewall? ;P
Cathy 

On 7:54 pm 06/19/07 "Chuck Blue" <sukchew@xxxxxxxxxxxxxx> wrote:
> Yep! The little ole lady school teacher that only drove her Sciroccos
> on the weekends.At he drags!
>     I think that there must be a turbo or more in your future.It
> makes way more than a cam.
> ole blue
> ----- Original Message -----
> From: "C Boyko" <roccit_53@xxxxxxxxxxxxxxxxxxxxxxx>
> To: <scirocco-l@xxxxxxxxxxxx>
> Sent: Sunday, June 17, 2007 4:02 PM
> Subject: MkI coolant temp guage with 2 prong ABA sensor
>
>
> >  Yeah, so at some point my laptop won't be riding shotgun 24/7, so
> >  I'll lose
> >  my coolant gauge on Megatune. This is in my '79, ABA head, with
> >  MSnS. Anyway, the stock ABA coolant temp sensor is in the coolant
> >  manifold, and just isn't working to send info to the stock cluster
> >  guage properly. The stock sender was a one wire, and hooking up
> >  the ABA sender with one wire to
> >  the gauge and the other to ground just pegs the gauge. How do I
> >  know what the expected output is from the stock sender, and how do
> >  I adjust what's coming from this ABA one? I don't think that the
> >  stock one could be easily adapted, as it probably grounds in the
> >  manifold, and the ABA one is plastic, not metal. I don't have an
> >  ABA Bentley to see how it's normally wired up. Thanks!
> >  Cathy
> >
> >
> >  _______________________________________________
> >  Scirocco-l mailing list
> >  Scirocco-l@xxxxxxxxxxxx
> >  http://neubayern.net/mailman/listinfo/scirocco-l
> >
> >
> >  --
> >  No virus found in this incoming message.
> >  Checked by AVG Free Edition.
> >  Version: 7.5.472 / Virus Database: 269.9.0/852 - Release Date:
> >  6/17/2007 8:23 AM