Rocco back, shifter linkage bushings

[gforbess at attglobal.net (Gordon Forbess)]

On Fri, 08 Jun 2007 08:44:30 -0400, "Edward Effinger"
<Eeffinger@xxxxxxxxxxxxxxxx> wrote:

>Does anyone offer a bushing kit for all the shifter linkage?

Typical kits are available everywhere for little $ and have all except
the shift rod bushing (the one that hangs from the steering rack).
That one, which comes riveted into a metal bracket, will be around
$50.  If someone has a source for that one at less, please post it up.

I use the A2 bushing (about $5) and drilled out the rivets in the
bracket to mount it, but it has a slightly larger diameter hole than
the proper A1 model and may contribute to the slop.  There is a teflon
aftermarket one that's the right size for about $30-35 but I don't
have that link handy at the moment.


Gordon
75 Mk I/Drake 1.9
http://pws.prserv.net/gforbess/scirocco/scirocco.htm