[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Tranny rebuild



You can do a one person bleed with a long piece of (clear) tube.  Attach one 
end to the bleeder, a long portion must go above the bleeder. This way the 
fluid fills up the tube rising up and allows the bubbles to escape while not 
allowing air back in when you release the brake.
John
----- Original Message ----- 
From: "Neptuno" <neptunonc@xxxxxxxxx>
To: "Roger" <rogercv1@xxxxxxxxx>; "Scirocco-L" <scirocco-l@xxxxxxxxxxxx>
Sent: Monday, August 06, 2007 4:15 PM
Subject: Re: Tranny rebuild


> You people suck!!! I am over here trying to do a bleed, job by 
> myself...... SO far the Michigan scirocco hardcore crowd consist of Me, 
> Myself and I...... To bad myself can not pump the brakes 20 times while I 
> open and close the cylinder valve....
>
>  Great post, way to go with that case.... How long did it take to saw?
>
>  El T
>
> Roger <rogercv1@xxxxxxxxx> wrote:
>  so after my fatefull trip to Ohio to pick up a set of wheels and my
> 5th gear stripping out, I picked up a 4K tranny that turned out to be
> an AGB with a Quaife LSD already installed that the user said was
> stuck in 3rd gear. bought the gasket set from GAP alog with some other
> seals and bearings. Dan Bubb and I proceeded to tear the AGB apart
> this past Saturday. I will now point you in the direction of a Vortex
> post about our adventure.
>
> http://forums.vwvortex.com/zerothread?id=3376950
>
> _______________________________________________
> Scirocco-l mailing list
> Scirocco-l@xxxxxxxxxxxx
> http://neubayern.net/mailman/listinfo/scirocco-l
>
>
>
> ---------------------------------
> Shape Yahoo! in your own image.  Join our Network Research Panel today!
> _______________________________________________
> Scirocco-l mailing list
> Scirocco-l@xxxxxxxxxxxx
> http://neubayern.net/mailman/listinfo/scirocco-l
>