[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Manifold tubes are plastic?!?



Check the photos of the two part numbers on www.worldimpex.com
Generally the alpha suffix, in an engineering sense indicates an engineering 
revision that may or may not be interchangeable with it's predecessor.
In this case it doesn't look like it.
Dan

From: "Allyn" <amalventano1@tds.net>
To: "'Dan Bubb'" <jdbubb@verizon.net>; "'Lexan Blanchard'" 
<lexan_122874@hotmail.com>; <scirocco-l@scirocco.org>
Sent: Sunday, April 15, 2007 7:54 PM
Subject: RE: Manifold tubes are plastic?!?


>> ETKA is a little difficult to understand here, but the part
>> number is either
>> 063 133 555 or 063 133 555A.
>
> Generally, equal part numbers with letters added indicate the same part at 
> a newer revision.
> Chances are both of those are equal, with the "A" part simply being a 
> revised design.
> HTH
> Al
>
>