[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Brakes are on but it still wont stop



Ron Pieper has a "cheap ass" version fairly easy to build. But its Saturday night so very little posting by those with lives :)

>-----Original Message-----
>From: brad boston [mailto:boston813roc@gmail.com]
>Sent: Saturday, October 14, 2006 07:59 PM
>To: 'scirocco list'
>Subject: Brakes are on but it still wont stop
>
>All,
>
>Over the last few weeks I have replaced the Brake master cylinder the rubber
>lines and all of the calipers with beautiful power coated ones. I finlay
>got every thing on the car and the system bled down (no more bubbles are
>coming out) but the pedal still goes right to the floor. I talked to Peter
>(thescirocco.com) and he suggested that I needed to bench bleed the master
>cylinder. After checking all of my friendly local auto parts stores I was
>unable to find a set of bench brake bleeders and I was wondering if there
>are any alternatives to doing that? Any help would be greatly appreciated.
>
>Brad
>_______________________________________________
>Scirocco-l mailing list
>Scirocco-l@scirocco.org
>http://neubayern.net/mailman/listinfo/scirocco-l
>