[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Fuseblock connector question



On 12:23:49 pm 05/13/06 "C Boyko" <roccit_53@scirocco.cs.uoguelph.ca> wrote:
> I'm tackling a few misc. wiring issues on Klaus, he has a few
> oddities that I thought I should be correct.
>
> So first, the heater fan stays on all the time, key in/out, does not
> matter. (PITA, because it drains the battery) It's supposed to go
> into the X track, which is switched power I'm pretty sure. Anyway, I
> thought I'd find a splice in the wire to constant power, but no, the
> black/red wire runs right from the switch to D19 with no splice or
> obvious wierdness. So, is this most likely a problem with the
> connector or the fuseblock itself? I was hoping to wait till after
> Cincy to do the new fuseblock, but if that's the most likely source
> of current going to the wrong place, I'll swap it out now. Also, my
> wipers are in a similar "always on" condition, that's the same
> connector too. So something's up with "D". Advice is welcome, I won't
> have it buttoned back up for a day or so I don't imagine.
> Thanks, Cathy
>
Well, correction, the wipers hook into a different connector, but what say
ye about the fan wierdness? connector or block????
Cathy