[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Need help IDing some wires on the 16V/also sensor ID needed



Ok, I figured out the answer to me question from yesterday, but have a few 
new ones.

First and most important, on the side of the 16v cylinder head surrounding 
the coolant
hose are four sensors.  I know what all but the one at the upper left 
is.  It has a gr/bl wire
going to it and the problem lies in that the other end leading to the 
fusebox area is not
connected.  I have poured over the wiring schematics over and over with no 
luck.  I have
even looked in engine, fuel, ignition and cooling sections of the Bentley 
trying just to ID
this sensor, which as far as I can tell is not mentioned.  My ETKA won't 
work, so does
anybody have an answer on this one?
Second is a br/wh wire ending in the engine compartment with a ring 
terminal at it's end.
I believe it attaches to the base of the coil.  This wire does not seem to 
be mentioned in
Bentley, but is obviously a ground.  I will probably connect it to one of 
the rings of grounds
next to the fusebox unless someone has a better idea.
Lastly, I have a gr/bl wire ending near the fusebox, but can't tell where 
it connects.  The other
end is in the dash loom and seems to lead to the center console area. The 
end is a black plug
with three terminals in a I_I configuration.  The left wire is black, the 
bottom is brown and the mystery
gr/bl is on the right.  I can't figure out what the hell this goes too.

I guess that's what I get for having this thing apart for so long.


John C. Worden
Bucksport, Maine

''98 Dakota 4x4-
'86 Scirocco 8V-Now a 16V! Needs: finish the wiring,
'78 Scirocco Brazil Brown Metallic, 4 speed.- In the Rotisserie
'89 Polaris Indy Deluxe



-- 
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.1.385 / Virus Database: 268.3.2/293 - Release Date: 3/26/06