ARP head stud questions...

[mk1mark at gmail.com (Mark F.)]

On 7/28/06, Chuck Blue <sukchew@cox.net> wrote:
>    I have ARP studs in my aba block and as I remember the studs should be
> installed fnger tight.There is no preload on the studs.Molly grease should
> be used on the threads.I don't remember the torque specs on the head nuts.I
> think basicly that the studs are almost loose.Tight is not always
> right.Don't double nut the studs to install them.
> Good Luck


Thanks Chuck!

Later,

Mark.
75
82
82 Caddy
93 Chevy/Kia 1/2 ton