SPAM-LOW: Re: Supply and Return Fuel Lines - Fitting Size - Adapting To The Smaller Motronic Size - HELP!

[verboten at michiganvw.org (Jason)]

somewhere out there a company was making motronic to CIS adapters

On 7/5/06, Peter <peter@thescirocco.com> wrote:
>
> ...That's definitely a help! Do you know what thread pitch it is?
>
> What about the smaller Motronic lines?
>
> Thanks Dan!
>
> Peter-302.832.8989
> http://thescirocco.com/
>
> Please! Include the previous text in your reply...
>
> -----Original Message-----
> From: Dan Bubb [mailto:jdbubb@verizon.net]
> Sent: Wednesday, July 05, 2006 3:02 PM
> To: peter@thescirocco.com; Scirocco-l@scirocco.org
> Subject: SPAM-LOW: Re: Supply and Return Fuel Lines - Fitting Size -
> Adapting To The Smaller Motronic Size - HELP!
>
> The stock fuel lines are 8mm which is virtually identical to 5/16 (within
> a
> couple .001") if that's any help.
>
> From: "Peter" <peter@thescirocco.com>
> Sent: Wednesday, July 05, 2006 2:50 PM
> Subject: Supply and Return Fuel Lines - Fitting Size - Adapting To The
> Smaller Motronic Size - HELP!
>
>
> > I'm finishing up a 2L16V passenger side Motronic swap, and I can't
> > find adapters to connect the Motronic fuel-distributor rubber pressure
> > hoses to the steel lines on the car. I tried my local hydraulic shop,
> > and I just came back from Colliflower in Bensalem, PA, and they only had
> standard.
> >
> > I'd like to know what size the fuel fittings are, so that I can look
> > for adapters on-line.
> >
> > Are Canadian hydraulic lines standard, or metric?
> >
> > TIA!
> >
> > Peter-302.832.8989
> > http://thescirocco.com/
> >
> > Please! Include the previous text in your reply...
> >
> >
> >
> > _______________________________________________
> > Scirocco-l mailing list
> > Scirocco-l@scirocco.org
> > http://neubayern.net/mailman/listinfo/scirocco-l
> >
>
>
>
> _______________________________________________
> Scirocco-l mailing list
> Scirocco-l@scirocco.org
> http://neubayern.net/mailman/listinfo/scirocco-l
>