Supply and Return Fuel Lines - Fitting Size - Adapting To The Smaller Motronic Size - HELP!

[jdbubb at verizon.net (Dan Bubb)]

The stock fuel lines are 8mm which is virtually identical to 5/16 (within a couple .001") if that's any help.

From: "Peter" <peter@thescirocco.com>
Sent: Wednesday, July 05, 2006 2:50 PM
Subject: Supply and Return Fuel Lines - Fitting Size - Adapting To The Smaller Motronic Size - HELP!


> I'm finishing up a 2L16V passenger side Motronic swap, and I can't find
> adapters to connect the Motronic fuel-distributor rubber pressure hoses to
> the steel lines on the car. I tried my local hydraulic shop, and I just came
> back from Colliflower in Bensalem, PA, and they only had standard.
> 
> I'd like to know what size the fuel fittings are, so that I can look for
> adapters on-line. 
> 
> Are Canadian hydraulic lines standard, or metric?
> 
> TIA!
> 
> Peter-302.832.8989
> http://thescirocco.com/
> 
> Please! Include the previous text in your reply...
> 
> 
> 
> _______________________________________________
> Scirocco-l mailing list
> Scirocco-l@scirocco.org
> http://neubayern.net/mailman/listinfo/scirocco-l
>