G60 swap questions

[nocones77-vw at yahoo.com (nocones77-vw@yahoo.com)]

Who is the seller?

The 02A transmission will not bolt into an A1. Period. There are people who have fabricated custom mounts, if you wish to give it a try, or maybe someone would make/sell you a set. As for the shifter, you would need to come up with a way of mounting the cable shifter mechanism in the car. Again, it has been done, but there aren't any simple bolt-ons to help you. The clutch can be converted to cable operation using some parts from a European Passat...but those parts are supposedly even becomming hard to find in Europe. People have converted the pedal cluster to use a hydro clutch, but again you're in the custom fabrication zone.

So, 02A is a big PITA. And I'm not totally convinced it can hold much/any more power than the 020. There are definitely more/better 020 ratios available, as well as cheaper junkyard replacements. I'd keep the 020 (and that's just what I did). But yes, you can install an 02A if you just feel like you have to.

Enjoy!

Neal

----- Original Message ----
From: Gordy Stedman <ydrogs@gmail.com>
To: "nocones77-vw@yahoo.com" <nocones77-vw@yahoo.com>; Scirocco-l@scirocco.org
Sent: Wednesday, January 25, 2006 3:29:44 PM
Subject: Re: G60 swap questions

I have taken in account everything that you all have written to me and have revised by purchase plan after talking to the seller last night.  Turns out the seller has 2 rabbits with G60 swaps and knows people at Bahn Brenner personally.  He say he drove the BBM red Corrado at last years Waterwagens event.  Which when I asked him if he had any proof that the g-ladder had been rebuilt he said he talked to someone at BBM and they confirmed it to him.  He could be blowing smoke up my ass but so far I have a good feeling about him.  
  
 So he is going to sell me these items for $1000
 G-60 block, head, intake manifold, throttle body and inlet hoses, fuel lines, injectors, supercharger, starter, intercooler and piping, radiator and piping, ignition, 02A tranny and shift linkage.  Hope to pick it up on Sunday. 
  
 Next barrage of question - Does the 02A tranny have any special mounts to a MK1 frame?  Do I need the ones that come with it or will I swap out for a standard 020 5 speed mount.  Any other tricks for this tranny swap?  Is the cable shift mechanism a semi easy swap using the Corrado pieces or do I need to source some other parts?  If the 02A is a better tranny for a hopefully 200hp motor (after future modifications) I will definitely like to use it.  Looks like there is a kit shown half way down the page on the link below for $400 but it looks like it includes a clutch and starter which I will already have. 
  
 < http://www.justveedubs.com/vwtransmission.php?PHPSESSID=8bd76fa01862c407263051f2693348f8&FormName=search_Form&FormAction=search&s_pcat=Transmission&s_vmdl=A2 >
 
 I am guessing that the output flanges are 100mm so I might as well swap over to the larger axle and hub setup.  Will the axles and hubs swap from the Corrado into a Scirocco?  That would be too easy if they did :)
   
 Thanks for letting me fill you inbox and for all the knowledge that has been filing mine.
 
   
 -- 
Gordy
MK1 x 3
MK2 x 1