[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Warm running CIS problem - Update



Get the Bosch book on CIS. and a fuel pressure sensor.
Bigmac.



On 2/14/06, C Boyko <roccit_53@scirocco.cs.uoguelph.ca> wrote:
>
> On 2:38:56 pm 02/14/06 Cory Langford <Cory_Langford@bcit.ca> wrote:
> > Good to know :)
> >
> > I had a quick look at Bently and saw the 5th injector and the switch,
> > but did not trace the power line back.  I assumed it went to switched
> > power.
> > But it does give me something to check, incase there is a wiring
> > issue.
> >
> >
> My default position on my CIS MkI is to assume it's wiring. And I was
> wondering if it's something that's got increased resistance when it's
> warm,
> and when the cool air rushes over it, it behaves. Regardless, in my case,
> a
> good going over wiring has seldom failed to turn up a problem, maybe not
> THE problem, so in my book it's all good. Check under the boot of any
> connectors you suspect too, I've found a bit of fractured insulation in
> those areas. GL, and you have my sympathies. When I ask for advice on
> mine,
> all I get is "get rid of the CIS". Nope, not till I master it at any rate.
> Cathy
>
>
> _______________________________________________
> Scirocco-l mailing list
> Scirocco-l@scirocco.org
> http://neubayern.net/mailman/listinfo/scirocco-l
>