[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

master brake cylinder



David Brown wrote:
>
> ----- Original Message ----- From: "C Boyko" 
> <roccit_53@scirocco.cs.uoguelph.ca>
> To: <silvius14@comcast.net>
> Cc: <scirocco-l@scirocco.org>
> Sent: Friday, April 07, 2006 10:05 PM
> Subject: Re: master brake cylinder
>
>
>> On 11:33:45 am 04/07/06 silvius14@comcast.net wrote:
>>> Does anyone have any advice on how to replace the master brake
>>> cylinder?  Any suggestion on the best place to buy one?
>>> Thanks,
>>> Karl
>>> _______________________________________________
>>>
>> I've bought from several places, but as for advice? I start 
>> marinating the
>> possible offending threaded bits as early as possible, I use Kroil on 
>> the
>> following: fittings on the lines to the MC, the nuts that hold it to the
>> booster, and the bleeders, especially the bleeders (on all four wheels).
>
> KROIL!  I thought only gun people used Kroil?
>
> Your scaring me. 8-)
>
> _______________________________________________
> Scirocco-l mailing list
> Scirocco-l@scirocco.org
> http://neubayern.net/mailman/listinfo/scirocco-l
>
Kroil is the shit, beats anything else I have tried...

David