Bosch Fog Lights

[silvius14 at comcast.net (silvius14@comcast.net)]

Thanks, to everyone who helped.  They both work now.  Thanks to Jeff and his picture, I just ran a ground from the housing to the frame.  The other side didn't need this, but hey.................they both work now!!!!

Karl

-------------- Original message -------------- 

> ----- Original Message ----- 
> From: silvius14@comcast.net 
> To: Jeff ; scirocco-l@scirocco.org 
> Sent: Sunday, October 02, 2005 5:40 PM 
> Subject: Re: Bosch Fog Lights 
> 
> 
> >Dumb question.................what grounds the Bosch >Fog Light?? Is it the 
> housing that's bolted to the >bumper? I tried taking the bulb out of the 
> housing, >connected a wire from the metal around the bulb >ground?) and attached 
> it to the bumper. Still nothing? 
> 
> >What am I missing? Gee did it ever work?? 
> 
> >Karl 
> 
> If it like this one 
> http://webpages.charter.net/nurian/MVC-902F.JPG 
> 
> The white wire is the bulb, and it leads to a black wire 
> The brown wire shown here is the ground for the lamp. 
> Coming from the rear of lamp assembly is 1 black and 1 brown wire. 
> If the ground checked ok, then check power to the lamp, and connections from 
> the lamp towards relay. Try the other new bulb in the problem lamp. As 
> suggested, you're bumper may not have provided a happy home for a ground. Just 
> need to find the weakest link... 
> Jeff 
> _______________________________________________ 
> Scirocco-l mailing list 
> Scirocco-l@scirocco.org 
> http://neubayern.net/mailman/listinfo/scirocco-l