Trans code OFQ?

[neptunonc at yahoo.com (Neptuno)]

Oh he does.... I saw it with my two eyes. Hell Mike was even doing work on that one!
 
El Tony

Jim Ruffi <sciroccos@earthlink.net> wrote:
I will do exactly as you say. I figure you oughta know ;-)
Would you suggest I get some parts from the dealer? There's a "must
replace" bolt in there and a circlip, yes? And the thrust washer?


>-----Original Message-----
>From: Dan Bubb [mailto:dan.bubb@gmail.com]
>Sent: Monday, October 03, 2005 10:33 AM
>To: Jim Ruffi
>Cc: Scirocco-L
>Subject: Re: Trans code OFQ?
>
>
>Out of all the 020 codes DFQ seems like what it would be.
>.80 5th which is good, but bear in mind it's a "16V" tranny in that it
>has the larger input shaft diameter and 4th gear splines on the pinion
>shaft are bigger.
>Fifth gear will swap fine though.
>Only 6 bolts and a small hammer away from a tooth count though.
>Warning, Warning!! Do not pull the shaft out of the center of the
>shift fork and don't let it fall out either! Various shift parts will
>come loose inside the tranny. Only shear luck (or a torch) will save
>your ass then!
>Dan
>


_______________________________________________
Scirocco-l mailing list
Scirocco-l@scirocco.org
http://neubayern.net/mailman/listinfo/scirocco-l

		
---------------------------------
Yahoo! for Good
 Click here to donate to the Hurricane Katrina relief effort.