A2 Grey bentley question

[ccarpen at earthlink.net (Cris Carpenter)]

I can tell you without looking it up that your plug gap is right on the 
money and compression figures running between 170 and 190 should be fine. A 
spread of 20 between your high and low cylinders is not insignificant, but 
it is probably not enough to cause any noticeable problems.
Cris

  At 06:47 AM 5/9/2005, you wrote:
>Message: 5
>Date: Sun,  8 May 2005 23:26:49 -0400
>From: "C Boyko" <roccit_53@scirocco.cs.uoguelph.ca>
>Subject: A2 Grey bentley question
>To: scirocco-l@scirocco.org
>Message-ID: <33182ca1ceafb57ab4a4715af32f64ab@scirocco.cs.uoguelph.ca>
>Content-Type: text/plain; charset=us-ascii
>
>I'd appreciate it if someone with the grey A2 bentley could look up the
>specs for an RD engine for me, I'm getting compression figures of
>180-190-180-170 psi and have gapped to between .7 and .9 on the plugs. I
>just want to confirm what the actual specs are, and my grey Bentley is with
>the son in North Bay.
>
>Thanks so much, and this is Rocco content, this is on the 79.
>
>Cathy