9mm 12 point socket

[roccit_53 at scirocco.cs.uoguelph.ca (C Boyko)]

I have the right socket, and let me tell you, it's not an easy one to find.
(9mm, 12 point) But I'd ask Snap-On again, they should carry them. Princess
carries the larger one you may also want to get if the crank bolt needs it,
for timing later on. Can't recall the size, or if the 16V needs that one. 

Cathy


> flywheel-to-pressure plate bolts are 9mm 12pt socket alright, but NOT
> triple-square.
> in other words, its a bolt head, not an allen socket.
> i've got a 9mm 12 pt in my craftsman set in 1/4 / 3/8 / 1/2 drive.
> you probably have one as well, now that you know its a normal head.
> hth
> Al
>
> ----- Original Message -----
> From: "Chad Eatock" <ceatock@sympatico.ca>
> To: "Sciroccolist" <Scirocco-l@scirocco.org>
> Sent: Saturday, July 30, 2005 4:48 PM
> Subject: 9mm 12 point socket
>
>
> Went to Toolex and found they don't make 9mm 12 point sockets, only
> 10mm and 8mm...  went to snapon and they don't seem to carry 9mm 12
> point either...whats up?  are the flywheel bolts 8mm?  I bought the
> 10mm and it is too big, so it must be a 9mm or 8mm??  Anybody know
> for sure?? _______________________________________________
> Scirocco-l mailing list
> Scirocco-l@scirocco.org
> http://neubayern.net/mailman/listinfo/scirocco-l
>
>
>
> _______________________________________________
> Scirocco-l mailing list
> Scirocco-l@scirocco.org
> http://neubayern.net/mailman/listinfo/scirocco-l
>