9mm 12 point socket

[amalventano1 at tds.net (Allyn)]

flywheel-to-pressure plate bolts are 9mm 12pt socket alright, but NOT 
triple-square.
in other words, its a bolt head, not an allen socket.
i've got a 9mm 12 pt in my craftsman set in 1/4 / 3/8 / 1/2 drive.
you probably have one as well, now that you know its a normal head.
hth
Al

----- Original Message ----- 
From: "Chad Eatock" <ceatock@sympatico.ca>
To: "Sciroccolist" <Scirocco-l@scirocco.org>
Sent: Saturday, July 30, 2005 4:48 PM
Subject: 9mm 12 point socket


Went to Toolex and found they don't make 9mm 12 point sockets, only 10mm and 
8mm...  went to snapon and they don't seem to carry 9mm 12 point 
either...whats up?  are the flywheel bolts 8mm?  I bought the 10mm and it is 
too big, so it must be a 9mm or 8mm??  Anybody know for sure??
_______________________________________________
Scirocco-l mailing list
Scirocco-l@scirocco.org
http://neubayern.net/mailman/listinfo/scirocco-l