[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Rear Oil Seal Questions- 1.7 8v

Subject: Rear Oil Seal Questions- 1.7 8v
From: area53 at validpath.com (Jeff Toomasson)
Date: Mon May 3 16:28:23 2004
In-reply-to: <050320042114.6010.4096B6260003266A0000177A2200734830FF909C9C908D969C@comcast.net>
References: <050320042114.6010.4096B6260003266A0000177A2200734830FF909C9C908D969C@comcast.net>

Don't forget to check/replace the seals in your tranny bellhousing. I once put 
a 16v input shaft seal on an 8v transmission....(idiot...))  :p

> Time to get down and dirty and change my rear oil seal AGAIN!
> 
> It started leaking almost as soon as I replaced it the first time. Now I
> need some ideas on how I can insure that it doesn't happen again. Has
> anyone used some gasket sealer around the outer edge of the oil seal
> itself? Do I need to do anything to the oil seal carrier? Or perhaps the
> other oil seal ring found on the outer plate separating the engine from
> transaxle?
> 
> Thanks in advance!
> 
> 
> _______________________________________________
> Scirocco-l mailing list
> Scirocco-l@scirocco.org
> http://neubayern.net/mailman/listinfo/scirocco-l

References:
- Rear Oil Seal Questions- 1.7 8v
  - From: scirocco at comcast.net (scirocco@comcast.net)

Prev by Date: Can't get the wheel off.
Next by Date: Can't get the wheel off.
Previous by thread: Rear Oil Seal Questions- 1.7 8v
Next by thread: Rear Oil Seal Questions- 1.7 8v
Index(es):
- Date
- Thread