Need to source a 11mm triple square and more explicit 3A

[ats at longcoeur.com (Patrick Bureau)]

Humm.... Headbolts... www.germanautoparts.com  check the web site, call
directly the 1-800 # and ask to dspeak to dave or mark, tell either of them
Patrick from texas send ya... From the scirocco list, and you need an 11mm
triple square to bolt your headbolts asap.

Cost is like 8$ I think, shipping overnight will be like (enveloppe item)
like 4-6$ at worst I bet (ask for shipping cost they can tell you rigth
away)
And tyou will have it in hand next day..

Cheers and get started... Only 68 days t'ill Cincy man !


---
ATS - Patrick Bureau -  Web site :
http://ats.longcoeur.com]http://ats.longcoeur.com
AIM: texasscirocco - Yahoo: atsgtx - ICQ: 32918816 - MSN: atsgtx@hotmail.com
See what I am selling today on eBay: http://tinyurl.com/22e5b

 

->-----Original Message-----
->From: scirocco-l-bounces@scirocco.org 
->[mailto:scirocco-l-bounces@scirocco.org] On Behalf Of stetson
->Sent: Thursday, March 25, 2004 11:26 PM
->To: scirocco list
->Subject: Need to source a 11mm triple square and more explicit 3A 
->
->
->K then....
->
->I'm sitting here, polishing off some Linguini Carbonara con 
->Portabella w/ freshly grated Romano and FUMING!!!
->
->The nice set of Allen/Torx/polygonal socket that cost me $35 
->DOES NOT HAVE A 11mm triple square!!!!
->
->Farging Bastiges!
->
->And most of you know why I need it.
->
->Head bolts.
->
->Where can I get this ONE socket (preferrably in stock and in 1/2"
->drive)?!?!?!?
->
->Snap On, tool mecca, has closed it's shops doors in my town.
->Sears doesn't have it.
->I'm afraid to check Autozone/O'Reilly's/Advance Auto/NAPA for 
->fear of not finding it there and going postal on the poor 
->cretinous people working there.
->
->Does ANYONE know of a place that might be in my geographical 
->location that would have this in stock?
->My last chance to get the head off is tomorrow evening as I'm 
->going to St.
->louis to see the Blackhawks and the Blues battle it out and 
->will leave early Sat. and get home Sun. night.
->
->If not, do you know where I could order it?
->
->The BFH and 12mm are just not going to cut it.
->
->Please? Pretty please? I'll wash and Zymol your DD, take out 
->the garbage, and fetch the remote for you.
->
->But now the good news:
->
->K.....I spent good money on a good deal on the 'tex (Now 
->THAT'S not something you hear often!) for a set of used ARP 
->head studs that came today (WEIRDEST nuts those puppies have. 
->You can only use a 12pt socket on
->them???) They look grand! No missing pieces and only $70.
->
->The oil filter mount and breather are off and the state of 
->the state can be seen @:
->http://unrealexpectations.ath.cx/3astrip/index.html
->
->(BTW....this is starting to cost some REAL money so I may 
->just be slapping on the old head on the newly rebuilt bottom 
->end and save a new head for a fall project. Good thing I got 
->the ARPs!)
->
->The bottom end will be getting the full treatment @ the 
->machine shop and I'll be investigating what sort of home loan 
->I'll need to get it powder coated (I never wanna see a rusty 
->block again) w/ all new bearings.
->
->But enough of my rant. Thank you for your indulgence!
->
->Tim
->
->
->After watching my newly-retired dad spend two weeks learning 
->how to make a new folder, it became obvious that "intuitive" 
->mostly means "what the writer or speaker of intuitive likes".
->	-- Bruce Ediger, bediger@teal.csn.org, on X the 
->intuitiveness of a Mac interface
->
->
->
->_______________________________________________
->Scirocco-l mailing list
->Scirocco-l@scirocco.org
->http://neubayern.net/mailman/listinfo/scirocco-l
->
->