clutch

[ats at longcoeur.com (Patrick Bureau)]

Well tyo know if it is your main seal, you will continue dissembly of the
pressure plate from the car (you did get new bolts right?) and you will find
it behind it.

As for the rod, yes this is normal as the clutch plate is no longer there to
push back on it.



---
ATS - Patrick Bureau -  Web site :
http://ats.longcoeur.com]http://ats.longcoeur.com
AIM: texasscirocco - Yahoo: atsgtx - ICQ: 32918816 - MSN: atsgtx@hotmail.com
See what I am selling today on eBay: http://tinyurl.com/22e5b

 

->-----Original Message-----
->From: scirocco-l-bounces@scirocco.org 
->[mailto:scirocco-l-bounces@scirocco.org] On Behalf Of Ryan Ruggles
->Sent: Tuesday, March 23, 2004 2:53 AM
->To: scirocco-l@scirocco.org
->Subject: clutch 
->
->ok so I got the tranny off.  Inside the bellhousing is soaked 
->bu the inout shaft looks pretty dry.  Is it the rear amin 
->seal?  Also I notied when I had the trnny out pulled up on 
->the clutch/shift lever on the tranny and I noticed the shift 
->rod didn; retract after I lt go of the shift lever.  Is that 
->normal or is that why my clutch was slipping?
->_______________________________________________
->Scirocco-l mailing list
->Scirocco-l@scirocco.org
->http://neubayern.net/mailman/listinfo/scirocco-l
->
->