V-Belts questions- what do I need?

[area53 at validpath.com (Jeff Toomasson)]

I've also been meaning to ask you which pulleys you're using (specifically 
crank).

The crank pulley from the early style A/C is different from not only the late 
style A/C, but also the late style non-A/C. I have the crank pulley you need 
(it flares out further than the non-A/C version).  Once you have the right 
pulley, you should be able to just buy the late-style A/C v-belt set and be 
good to go.

LMK, JT

> What bracket did you use?  i.e. what car did it come from?
> 
> If it's the heavy cast iron bracket, that you find on '85 and up A1/A2's,
> then the belts would be the same as the car it came off of.  
> 
> 
> Peter
> http://thescirocco.com
> Feel free to call me between 11AM and 11PM - 302.832.8989.
> 
> 
> -----Original Message-----
> From: scirocco-l-bounces@scirocco.org
> [mailto:scirocco-l-bounces@scirocco.org] On Behalf Of Scirocco
> Sent: Tuesday, June 29, 2004 1:59 AM
> To: scirocco-l@scirocco.org
> Subject: V-Belts questions- what do I need?
> 
> I converted my 1981 Scirocco to a Sanden A/C compressor and upgraded to a
> 90A alternator. I still have my manual steering rack. Does anyone know
> which V-belts I will need?
> 
> Guido
> 1981 S (frequently needing work) - if I could only find the time for my
> project!
> 
> 1980 16v (the project)
> 
> 
> _______________________________________________
> Scirocco-l mailing list
> Scirocco-l@scirocco.org
> http://neubayern.net/mailman/listinfo/scirocco-l