[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Motor Mount questions



I took stock side mounts and glued them using
construction polyurathane glue from home depot.  This
in combination with a red poly front mount an a rear
motorsport mount help up very well to 250+whp.  No
motor rocking at all.  I still had some wheel hop, but
that could have been the rather soft sport springs I
had.  It was rather rough in the carthough.  There was
alot of vibration in the car.  
YMMV
Tony


--- Adrian <adrian.culda@sympatico.ca> wrote:
> Hey all!
> 
> I have a few questions about a little motor mount
> problem that I'm
> having on my car.
> First of all: I'm ready to pull the stock JH out and
> on the motor side
> mount. The bolt rusted solidly into the metal sleve
> of the mount and I
> can't pull the bolt out. (I think I got this covered
> tomorrow with a
> reciprocating saw ;)
> 
> Second question: Did anyone here try to make their
> own urethane
> mounts???
> Or buying the factory unit and filling it with
> liquid urethane???
> If yes how does it feel?? 
> 
> Third question: Where can VW Motor Sport mounts can
> be purchased at? And
> how big of a difference is it over the factory unit
> (I'm trying to
> figure out what's going on with these because I have
> a little one that I
> have to account for and the wife got to learn
> Standard on my car! So it
> has to be gentle yet Strong :)
> 
> Fourth question: Has anyone ever though of drilling
> the rear
> transmission mount and putting 2 screws through it
> to limit the amount
> of travel so it won't break?? Anyone??
> 
> Fifth question: What should I use to reinforce the
> radiator support??
> I have a nice L shaped 2mm thick piece of sheet
> metal. Would it work if
> I would weld onto the radiator support??? Or Should
> I try to make to
> copy of that piece that was floating around on the
> Vortex?
> 
> Sixth question: How harsh would it be if I would
> replace all the mounts
> with poly units???
> 
> LMK about your thoughts and experiances
> TIA
> 
> Adrian C.
> Project Scirocco R2.oT - "The Turbocharged 16Valves
> of Fire Breathing
> Fury"
> ( 2.0L 16V T66 )
> 
> 
> _______________________________________________
> Scirocco-l mailing list
> Scirocco-l@scirocco.org
> http://neubayern.net/mailman/listinfo/scirocco-l


__________________________________
Do you Yahoo!?
Yahoo! SiteBuilder - Free web site building tool. Try it!
http://webhosting.yahoo.com/ps/sb/