Fw: HELP(Proj Stalled): Mount Direction

[jdanda at sunflower.com (James S. Danda)]

Found this, hope its right, I'm off to find a shop w/a press. 10min on the vise
and I realize its out of my league :) 

http://longcoeur.com/scirocco/Index2.html

----- Original Message ----- 
From: James S. Danda 
To: scirocco-l@scirocco.org 
Sent: Saturday, January 10, 2004 12:24 PM
Subject: HELP(Proj Stalled): Mount Direction


I'm replacing the engine  mounts on my '86 16v. I have the passenger mount and bracket off. But in doing so I destroyed the old mount(the bolt was fused to the inner sleeve of the old mount). So I don't have a reference as to the correct orientation to press the new mount into the bracket.

If I'm lucky and someone has a picture, or directions for the proper orientation, the could send me.
I was hoping to get this done today (beg, beg, beg....)

Thanks!
Jim