Tranny interchange

[amalventano at sc.rr.com (Allyn)]

> Some of the earlier ones apparently don't have some features required for
> the rear mount, but any 84 and later 020 will bolt right in.

from what i've seen, the housings are the same, you only have to move the 
hardware over from the donor tranny. replace a couple of the bolts with the 
bolt/stud combo from the other tranny, etc. i only know this cause i use 
older trannys all the time (FF/FN), and all it has even took was that simple 
hardware swap (and the occasional 100mm flange retrofit).
hth
Al