[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

1.8T pistons in a 16v motor



bore stroke disp rod wrist pin 
16v 81.0 86.4 1781 48 144 20 33.4 -5 220 10:1 
20v 81.0 86.4 1781 48 144 22 32.8 0.0 220 9.15:1 
think they will fit.



I wanted to build a motor with stock vw parts that I can boost to 350hp. Because the way I look at it a 16v bottom end has forged crank, some BIG boy rods and cast pistons. so If I can use 1.8T forged pistons I'll have a somewhat STRONG bottomend. so if it works the bottomend is done and I can send the head out to get P&P and some valve springs and some turbo cams and hit Killa up for a t3/t4 with the biggest wheel I can get in it and I'll have a motor that is capable of running 11 sec all day long with stock vw parts. My biggest problem is if they will fit. I mean anything 9:5.1 and under will be suitable for me. I have a TEC 2 right now about to go into a stock 16v motor.