[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Ball joint bolt kit



Seems contradictory, huh?   
Consider this, though; putting (more) tensile stress on a bolt doesn't make it any stronger.  It just increases the clamping force, which, in this case, would be inconsequential. 
(actually, I'd be willing to bet that the nuts are indeed steel,  plated for corrosion protection)

Larry
sandiego16v

  ----- Original Message ----- 
  From: Allyn 
  To: Dan Bubb ; Derrick Floyd ; scirocco mailing list 
  Sent: Sunday, September 14, 2003 7:32 AM
  Subject: Re: Ball joint bolt kit


  yeah, the bolt itself is high strength (shear in particular). funny thing is
  that the nut is something rediculous like copper or something, making the
  torque spec rediculously low.
  Al

  ----- Original Message ----- 
  From: "Dan Bubb" <jdbubb@ix.netcom.com>
  To: "Derrick Floyd" <derrickmd18@verizon.net>; "scirocco mailing list"
  <scirocco-l@scirocco.org>
  Sent: Sunday, September 14, 2003 6:29 AM
  Subject: Re: Ball joint bolt kit


  > Ron:
  > I know you're a cheapass and you may know enough about bolts to go to the
  > hardware store and buy the correct size (7mm isn't very common) and grade.
  > But, considering this is a high stress application and the consequences of
  > bolt failure are severe I think it's better to suggest getting the bolts
  at
  > the dealer or a parts house specifically for this application.
  > Dan
  >
  >
  > ----- Original Message -----
  > From: Ron Pieper <rapieper@yahoo.com>
  > To: Derrick Floyd <derrickmd18@verizon.net>; scirocco mailing list
  > <scirocco-l@scirocco.org>
  > Sent: Saturday, September 13, 2003 8:54 PM
  > Subject: Re: Ball joint bolt kit
  >
  >
  > > They come with the ball joints.  Barring that, a good hardware store
  > should fix you up cheap -
  > > they're not a special size.
  > >
  > > Ron
  > >
  > > --- Derrick Floyd <derrickmd18@verizon.net> wrote:
  > > > Any one know where I can get a ball joint bolt kit from?  I have to
  > replace my ball joints and I
  > > > need the 3 nuts and bolts for each side.
  > >
  > >
  > > __________________________________
  > > Do you Yahoo!?
  > > Yahoo! SiteBuilder - Free, easy-to-use web site design software
  > > http://sitebuilder.yahoo.com
  > >
  > > _______________________________________________
  > > Scirocco-l mailing list
  > > Scirocco-l@scirocco.org
  > > http://neubayern.net/mailman/listinfo/scirocco-l
  >
  >
  >
  > _______________________________________________
  > Scirocco-l mailing list
  > Scirocco-l@scirocco.org
  > http://neubayern.net/mailman/listinfo/scirocco-l


  _______________________________________________
  Scirocco-l mailing list
  Scirocco-l@scirocco.org
  http://neubayern.net/mailman/listinfo/scirocco-l