Ball joint bolt kit

[jdbubb at ix.netcom.com (Dan Bubb)]

Ron:
I know you're a cheapass and you may know enough about bolts to go to the
hardware store and buy the correct size (7mm isn't very common) and grade.
But, considering this is a high stress application and the consequences of
bolt failure are severe I think it's better to suggest getting the bolts at
the dealer or a parts house specifically for this application.
Dan


----- Original Message -----
From: Ron Pieper <rapieper@yahoo.com>
To: Derrick Floyd <derrickmd18@verizon.net>; scirocco mailing list
<scirocco-l@scirocco.org>
Sent: Saturday, September 13, 2003 8:54 PM
Subject: Re: Ball joint bolt kit


> They come with the ball joints.  Barring that, a good hardware store
should fix you up cheap -
> they're not a special size.
>
> Ron
>
> --- Derrick Floyd <derrickmd18@verizon.net> wrote:
> > Any one know where I can get a ball joint bolt kit from?  I have to
replace my ball joints and I
> > need the 3 nuts and bolts for each side.
>
>
> __________________________________
> Do you Yahoo!?
> Yahoo! SiteBuilder - Free, easy-to-use web site design software
> http://sitebuilder.yahoo.com
>
> _______________________________________________
> Scirocco-l mailing list
> Scirocco-l@scirocco.org
> http://neubayern.net/mailman/listinfo/scirocco-l