Pins on 2L blocks

[dswalterwi at earthlink.net (dswalterwi)]

They can be tapped down also.  They line up with the 2L head gasket
which you will need (not the 1.8).  You may not have to tap them down
all the way but they will need to go down some as they will hit on part
of the head when it is set on top.  I hammered mine down all the way to
avoid any clearance problems.

Don

-----Original Message-----
From: scirocco-l-bounces@scirocco.org
[mailto:scirocco-l-bounces@scirocco.org] On Behalf Of Julie Macfarlane
Sent: Saturday, September 06, 2003 5:55 AM
To: scirocco-l@scirocco.org
Subject: Pins on 2L blocks

The 2 pins that hold the head on a 2L block are in different positions
on a 
1.8l head.
Can one of the pins be pulled and placed else where? Or just pulled and 
forgotten.



Julie Macfarlane
Menlo Park Research & Development
Internet Application Developer
www.menloparkrandd.com
www.montgomeryweb.org
Amsterdam NY

_________________________________________________________________
Express yourself with MSN Messenger 6.0 -- download now! 
http://www.msnmessenger-download.com/tracking/reach_general


_______________________________________________
Scirocco-l mailing list
Scirocco-l@scirocco.org
http://neubayern.net/mailman/listinfo/scirocco-l