[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
non-ac belt
- Subject: non-ac belt
- From: Joe.Doty at lcnetwork.com (Joe Doty)
- Date: Wed Nov 26 12:28:21 2003
You are correct, if you move the alternator down to the A/C position the
stock pulley lines up. You will need a 38 inch belt to make this setup
work. If you leave it in the stock position you will need an extra
spacer and a pulley from an A2 8v alternator. To make this work you
need a 45 inch belt.
Joe
-----Original Message-----
From: Ryan H [mailto:rhock99@epix.net]
Sent: Monday, November 24, 2003 9:54 PM
To: derrickmd18@verizon.net
Cc: scirocco-l@scirocco.org
Subject: Re: non-ac belt
Derrick, don't go ripping the stock pulley off your alternator just yet
- when I used a modified stock bracket, I believe the factory (16V)
alternator pulley lined up perfectly. Can't remember 100% though.
- Follow-Ups:
- non-ac belt
- From: derrickmd18 at verizon.net (Derrick flo)