non-ac belt

[rhock99 at epix.net (Ryan H)]

Derrick, don't go ripping the stock pulley off your alternator just yet - when I used a modified stock bracket, I believe the factory (16V) alternator pulley lined up perfectly.  Can't remember 100% though.

> 
> From: "peter" <peter@thescirocco.com>
> Date: 2003/11/24 Mon PM 10:42:49 EST
> To: "'Derrick flo'" <derrickmd18@verizon.net>, 
> 	<scirocco-l@scirocco.org>
> Subject: RE: non-ac belt
> 
> 
> -----Original Message-----
> From: scirocco-l-bounces@scirocco.org
> [mailto:scirocco-l-bounces@scirocco.org] On Behalf Of Derrick flo
> Sent: Monday, November 24, 2003 10:35 PM
> To: scirocco-l@scirocco.org
> Subject: non-ac belt
> 
> Ok my alternator went up on my scirocco 16v and I'm getting another
> alternator.  I have a custom non a/c bracket that I brought a while ago
> and since I'm replacing my alternator I might as well install the
> bracket.  the a/c is already out of the car and the alternator is
> sitting in the stock position with a longer belt.  I wanted to know what
> belt do I need to move it to the a/c position?  I have a 16v and a 8v
> pulley already.  doing this tomorrow so I need the info.
> 
> Ryan did I nice tech page on that:
> 
> http://home.epix.net/~rhock99/tech_ac.htm
> 
> 
> Peter
> 302.832.8989
> http://thescirocco.com
> 
> 
> 
> 
> _______________________________________________
> Scirocco-l mailing list
> Scirocco-l@scirocco.org
> http://neubayern.net/mailman/listinfo/scirocco-l
>