[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

SCIROCCO.ORG SPEAK UP!!



Well, I am interested depending on one detail...  Will the bushings from the 
Rabbit fit if they are on the Rabbit seats?  Depending on the answer, I will 
be buying accordingly...

Thanks, 

David

Quoting Jeff Toomasson <jtoomasson@yahoo.com>:

> As much as I need this part, it would not be worth it to me at $25. $15 is
> palatable and I would buy two sets.
> 
> I would also recommend you hit up the Vortex if you haven't already. There
> is a sizeable faction of mk1 owners there not on the list (most of which
> were listers at some point or other).
> 
> Thanks for your diligence in setting this up - Jeff
> ----- Original Message ----- 
> From: "Chris D. Edwards" <chris@westcoastpromos.com>
> To: <scirocco-l@scirocco.org>
> Sent: Thursday, November 20, 2003 9:27 AM
> Subject: SCIROCCO.ORG SPEAK UP!!
> 
> 
> > OK everybody, I will need some participation from everyone on the
> > mailing list with a first generation Scirocco.  I am looking at having
> > the front seat guide clips reproduced and possibly redesigned to hold up
> > longer.  If you don't know what I am talking about it is the two little
> > plastic clips that go in the front center seat channel on the floor.
> > These clips keep your seat from rattling and allow a nice smooth gliding
> > action forward and back.  These are no longer made by Volkswagen and no
> > one else has reproduced them yet.  Just about every Mark 1 Scirocco from
> > 1976 - 1981 out there is missing them or they are worn out.  I will be
> > running these as a kit which will include all guides for one seat ( 2
> > front clips and 2 rear rail bushings).
> >
> > The mold will cost around $1000.00 and then the plastic injection on top
> > of that.  I am asking all Mark 1 Scirocco.org members to help me by
> > letting me know if they would be interested in buying these kits to
> > cover the cost of an itial run.  The more members that say yes I want X
> > number of sets the sooner I can decide to get them done.  The kits will
> > run somewhere around $15 to $25 depending on how many people will buy
> > them.  If I can get some larger companies to stock them the prices will
> > drop considerably.  The inital run is the crutial part of this and as a
> > Mark 1 owner I know what a pain it is to have a seat that won't adjust
> > or rattles all the time!
> >
> > Thanks everybody and let me know asap.
> >
> > Chris Edwards
> > 81 Scirocco JH
> > 81 Scirocco 16V
> >
> >
> >
> > _______________________________________________
> > Scirocco-l mailing list
> > Scirocco-l@scirocco.org
> > http://neubayern.net/mailman/listinfo/scirocco-l
> 
> 
> _______________________________________________
> Scirocco-l mailing list
> Scirocco-l@scirocco.org
> http://neubayern.net/mailman/listinfo/scirocco-l
> 


-- 
Cable Motors
4710 NW 39th St.,
Oklahoma City, OK, 73122

405-470-3127  direct

1-800-522-6793