[TECH - ELECTRICAL] A question about Grounding of Wiring

[amalventano@sc.rr.com (Allyn)]

should be okay. only possibly problem is noise present on the coil ground.
if all connectors are clean / wires are new, this shouldnt be an issue.
Al

----- Original Message -----
From: "ATS - Patrick Bureau" <txrocco@sbcglobal.net>
To: "_Scirocco Mailing List" <scirocco-l@scirocco.org>
Sent: Tuesday, March 25, 2003 3:50 PM
Subject: [TECH - ELECTRICAL] A question about Grounding of Wiring


>
> I am currently re-wiring the engine bay (shortening and hiding wires from
> eye sight)
>
> the question I have. if a wire that is connected directly to the ground of
> the battery (electrical ground) can be moved to a good chassis ground?
> I understand the Battery ground is wired to the chassis, so in my head
this
> would be the same thing, but I am still wondering if there would be a
reason
> to not  do this (specifically thinking of moving a line 12 gauge ground
wire
> from the TB "kick down" enrichment switch from running 6ft from the TB to
> the battery to 6 inches to the ground at the coil.
>
> any thoughts on good or bad affects this could bring or maybe am I a worry
> worm?
>
> ATS - Patrick Bureau - txrocco@sbcglobal.net
>
>
> _______________________________________________
> Scirocco-l mailing list
> Scirocco-l@scirocco.org
> http://neubayern.net/mailman/listinfo/scirocco-l