Sway Bar Question

[flaatr@yahoo.com (Euroroc II)]

it was http://www.adbracing.com or something similar... I'm not sure what 
it is now. Josh you know?

-RGK-

At 05:41 PM 3/24/2003 -0500, JoshuaA.Conner@VerizonWireless.com wrote:
>What is ADB's website.
>
>Joshua C.
>
>-----Original Message-----
>From: Euroroc II [mailto:flaatr@yahoo.com]
>Sent: Monday, March 24, 2003 5:29 PM
>To: Alan Stamper; JoshuaA.Conner@verizonwireless.com;
>scirocco-l@scirocco.org
>Subject: Re: Sway Bar Question
>
>
>I have a Borla muffler and it's on the small side so interference is not an
>issue...
>
>Now the last, and originally the first question, are Autotech hollow bars
>and ADB hollow bars made by the same people and just branded differently or
>are they totally different but similar?
>
>-Raffi
>
>
>At 05:07 PM 3/24/2003 -0500, Alan Stamper wrote:
> >I had the hollow 25/28 bars on my car with 350F/450R springs on the car.
> >Really flat.  As far as the brackets go, there are a couple of options.
> >Autotech sells heavy duty versions that look like the factory ones, EM
> >motorsport sells billet parts (if they are still in business, I couldn't
>get
> >their website to come up) or you can take a factory set, drill the studs
>out
> >of the and then place a 1 3/4 muffler clamp over the top and through the
> >holes where the studs were and weld it together.  I did this to mine and
> >they never broke in my 10 years of auto-xing the car.
> >
> >Alan
> >----- Original Message -----
> >From: "Euroroc II" <flaatr@yahoo.com>
> >To: <JoshuaA.Conner@VerizonWireless.com>; <scirocco-l@scirocco.org>
> >Sent: Monday, March 24, 2003 4:10 PM
> >Subject: RE: Sway Bar Question
> >
> >
> > > So far that is 2 1/2 votes for and 1 1/2 against.
> > >
> > > The 1/2 vote is that the bar is so effective in front (+1/2) that the
> > > provided mounting brackets are a little too weak for the bar and often
> > > break (-1/2) so they should be replaced with beefier ones.
> > >
> > > Anyone else heard of a fitment issue with these bars against the
>exhaust,
> >etc?
> > >
> > > Leaning towards a possible purchase.
> > > -RGK-
> > >
> > > At 03:43 PM 3/24/2003 -0500, JoshuaA.Conner@VerizonWireless.com wrote:
> > > >I and Anson have driven a 16V MkII with a not so good alignment with
> > > >bilstein sports, eibach springs and the hollow anti-sway autotech
>bars...
> > > >WOW! as close to neutral steering as i have ever experienced.  No lean
>to
> > > >speak of.
> > > >
> > > >Joshua C.
> > > >
> > > >-----Original Message-----
> > > >From: Euroroc II [mailto:flaatr@yahoo.com]
> > > >Sent: Monday, March 24, 2003 1:48 PM
> > > >To: JoshuaA.Conner@verizonwireless.com; rocco16v@netzero.net;
> > > >scirocco-l@scirocco.org
> > > >Subject: RE: Sway Bar Question
> > > >
> > > >
> > > >Yes and I can get a great deal on the ADB variant from J's but the main
> > > >question is are they any good. If it's a choice of spending more to get
> > > >more I will... but if the lower price hollow bars perform better then
> >it's
> > > >a no brainer... right?
> > > >
> > > >-Raffi-
> > > >
> > > >At 10:06 PM 3/21/2003 -0500, JoshuaA.Conner@VerizonWireless.com wrote:
> > > > >Peter (the scirocco)  offers great pricing on the autotech L/W
> > > > >bars.  Great service too!
> > > > >
> > > > >Joshua C.
> > > > >-----Original Message-----
> > > > >From: L F [mailto:rocco16v@netzero.net]
> > > > >Sent: Friday, March 21, 2003 9:47 PM
> > > > >To: scirocco-l@scirocco.org; Euroroc II
> > > > >Subject: Re: Sway Bar Question
> > > > >
> > > > >Basically, the choice is this:
> > > > >Hollow bars are slightly lighter than a solid bar of equivalent
>"torque
> > > > >value", but they must be slightely larger in diameter. They also cost
> >more?
> > > > >
> > > > >Larry
> > > > >----- Original Message -----
> > > > >From: <mailto:flaatr@yahoo.com>Euroroc II
> > > > >To: <mailto:scirocco-l@scirocco.org>scirocco-l@scirocco.org
> > > > >Sent: Friday, March 21, 2003 1:16 PM
> > > > >Subject: Sway Bar Question
> > > > >
> > > > >Now for a relevant topic...
> > > > >
> > > > >A few days ago not much email was going thru I asked if anyone knew
>if
> > > > >Autotech hollow swaybars and ADB hollows where made by the same
> >people....
> > > > >I was told that they were but would like to confirm it since the ADB
>is
> >a
> > > > >much better deal ($$$)
> > > > >
> > > > >Anyone running hollow bars wish to share their opinion vs. solid
> >bars...
> > > > >
> > > > >-Raffi
> > > > >
> > > > >
> > > > >
> > > > >_______________________________________________
> > > > >Scirocco-l mailing list
> > > > ><mailto:Scirocco-l@scirocco.org>Scirocco-l@scirocco.org
> > > > >http://neubayern.net/mailman/listinfo/scirocco-l
> > > >
> > > >_______________________________________________
> > > >Scirocco-l mailing list
> > > >Scirocco-l@scirocco.org
> > > >http://neubayern.net/mailman/listinfo/scirocco-l
> > >
> > >
> > > _______________________________________________
> > > Scirocco-l mailing list
> > > Scirocco-l@scirocco.org
> > > http://neubayern.net/mailman/listinfo/scirocco-l