hot engine after-run circuit

[brian_wagner@sbcglobal.net (Brian Wagner)]

--0-51602141-1047794738=:73054
Content-Type: text/plain; charset=us-ascii


Wire colors would help, then we could go out to the car and snap some pics and solve this damn problem.
Brian 
PS glad it is running again
 Allyn <amalventano@sc.rr.com> wrote:when i put the 2.0 in the rieger i was left scratching my head when
reconnecting one of the wires. on the right side of the head there are 4
senders. the 2 bottom ones are easy (color coded plugs), the upper rear is a
tab that sticks out (also easy, since there is only one plastic covered
connector for that as well). the upper front is a flat disc thats meant to
take a typical crimp connector type plug, only sideways. the catch is that
there is another one of these same flat discs at the rear right side of the
head, yet i have only one connector to put on. im fairly certain the wire is
to the after-run circuit, but the bentley gets really sketchy when it talks
about this circuit. i cant find the wire in the schematics, and cant find a
physical head-sensor layout in there either. has anyone figured out what
goes where as far as these single wire connections go?
Al


_______________________________________________
Scirocco-l mailing list
Scirocco-l@scirocco.org
http://neubayern.net/mailman/listinfo/scirocco-l
--0-51602141-1047794738=:73054
Content-Type: text/html; charset=us-ascii

<P>Wire colors would help, then we could go out to the car and snap some pics and solve this damn problem.
<P>Brian 
<P>PS glad it is running again
<P>&nbsp;<B><I>Allyn &lt;amalventano@sc.rr.com&gt;</I></B> wrote:
<BLOCKQUOTE style="PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #1010ff 2px solid">when i put the 2.0 in the rieger i was left scratching my head when<BR>reconnecting one of the wires. on the right side of the head there are 4<BR>senders. the 2 bottom ones are easy (color coded plugs), the upper rear is a<BR>tab that sticks out (also easy, since there is only one plastic covered<BR>connector for that as well). the upper front is a flat disc thats meant to<BR>take a typical crimp connector type plug, only sideways. the catch is that<BR>there is another one of these same flat discs at the rear right side of the<BR>head, yet i have only one connector to put on. im fairly certain the wire is<BR>to the after-run circuit, but the bentley gets really sketchy when it talks<BR>about this circuit. i cant find the wire in the schematics, and cant find a<BR>physical head-sensor layout in there either. has anyone figured out what<BR>goes where as far as these single wire connections go?<BR>Al<BR><BR><BR>_______________________________________________<BR>Scirocco-l mailing list<BR>Scirocco-l@scirocco.org<BR>http://neubayern.net/mailman/listinfo/scirocco-l</BLOCKQUOTE>
--0-51602141-1047794738=:73054--