[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

tools for tranny swap?



Cool thanks, I'm printing this and bringing it to
NAPA. Unfortunately, I really need the car on the road
NOW, so while the clutch isn't great, it's usable
until my motor swap later this summer. Hopefully NAPA
has tranny bushings, otherwise I'll have to make do
without those too I guess. Damn, forgot the speedo
cable had to come out. It's a slightly stripped, very
stuck phillips head screw. The drain plug socket is
supposed to be inverted correct? Any others inverted?
Any other helpful info you could pass on? This is
really out of my league mechanics-wise but I have no
choice. Any tech write-ups out there?

Dan

--- Jeff Toomasson <jtoomasson@yahoo.com> wrote:
> You should have no problems swapping those. Make
> sure you do the clutch
> while you're in there, unless the existing is of
> known quality. Tranny
> bushings are $5 - do those too.
> 
> You'll need:   11mm socket and 10mm socket (various
> bell housing bolts,
> speedo cable), 8mm allen (I think - starter bolts (I
> have also seen starter
> bolts with a 10mm-12pt/triple-square), 17mm allen
> (tranny drain plug),
> 9mm-12pt socket (flywheel), 8mm 12-pt/triple-square
> (CV bolts), 17mm socket
> (pressure plate, multiple engine mounts), torque
> wrench, 17mm and 19mm combo
> wrenches, bailing wire/coat hanger (securing of PP).
> 
> 1) Take transmission mount off bell housing before
> trying to remove tranny
> (I'm pretty sure the Bentley says you get by without
> doing this, but I will
> NEVER go that route again).
> 
> 2) triple-check to make sure speedo cable and
> linkage is completely free
> (don't ask me how I know)
> 
> Anything else?  :)
> ----- Original Message ----- 
> From: "Dan Smith" <sad_rocc@yahoo.com>
> To: <scirocco-l@scirocco.org>
> Sent: Thursday, July 10, 2003 1:32 PM
> Subject: tools for tranny swap?
> 
> 
> > I didn't get a response yesterday so let me try
> again.
> > The tranny in my mk1 died (FF) so now I have to
> swap
> > the tranny from my 84 mk2 (4k) into it. What
> special
> > tools do I need, what important things do I need
> to
> > know and will the tranny swap over nicely?
> >
> > Dan
> >
> > __________________________________
> > Do you Yahoo!?
> > The New Yahoo! Search - Faster. Easier. Bingo.
> > http://search.yahoo.com
> >
> > _______________________________________________
> > Scirocco-l mailing list
> > Scirocco-l@scirocco.org
> > http://neubayern.net/mailman/listinfo/scirocco-l
> 
> 
> _______________________________________________
> Scirocco-l mailing list
> Scirocco-l@scirocco.org
> http://neubayern.net/mailman/listinfo/scirocco-l


__________________________________
Do you Yahoo!?
The New Yahoo! Search - Faster. Easier. Bingo.
http://search.yahoo.com