[Re: coolant line question]

[jlagnese at massed.net (John Lagnese)]

Those tools are fairly costly! Around $100 IIRC!
----- Original Message -----
From: "Allyn" <amalventano@sc.rr.com>
To: "Cathy Boyko" <losinit@usa.net>; "Drew MacPherson"
<drew@scirocco.cs.uoguelph.ca>
Cc: <scirocco-l@scirocco.org>
Sent: Tuesday, July 01, 2003 11:15 PM
Subject: Re: [Re: coolant line question]


> spring clamp tool???
> sure, it might be nice and all, but if you're gonna go through the trouble
> of replacing that pipe, you might as well replace those spring clamps as
> well (with 'normal' ones, that is).
> Al
>
> ----- Original Message -----
> From: "Cathy Boyko" <losinit@usa.net>
> To: "Drew MacPherson" <drew@scirocco.cs.uoguelph.ca>; "Cathy Boyko"
> <losinit@usa.net>
> Cc: <scirocco-l@scirocco.org>
> Sent: Tuesday, July 01, 2003 10:38 PM
> Subject: Re: [Re: coolant line question]
>
>
> Yeah, I'm off on a mission tomorrow to acquire said pipe. And I may just
> stop
> into Princess to see if I can get one of those nifty spring clamp tools. I
> don't care what it costs, I used one once, and I just can't deal with not
> having one. The pipe, on the other hand, may well end up being a
"previously
> loved" edition. I can't imagine there is much difference between the 1.8
and
> 2L versions, obviously the 1.8 fits around the 2L block just fine. There
> were
> a few 2L 16V candidates at Mikes's last time I was there.
> Cathy
>
> Drew MacPherson <drew@scirocco.cs.uoguelph.ca> wrote:
> >
> > Cathy, that's the coolant pipe (or heater pipe) I was telling you about.
> >
> > P/N is 027 121 065 K for 1.8 16V and 027 121 065 P for 2.0 16V.  I don't
> > know what the difference between the two is.
> >
> > Probably your fastest method of acquiring one is the dealer, or a
> > "breaker."
> >
> > Drew
> >
> > On Tue, 1 Jul 2003, Cathy Boyko wrote:
> >
> > > Hi, it's me again. The headache had been dribbling coolant, it's where
a
> short
> > > chunk of rubber hose (with one of those @&*$)*@)_# spring clamps that
> the
> > > mechanincs put in an impossible to get at location) joins into a solid
> steel
> > > line that I guess goes to the heater core (still no Bentley, Canda
Post
> really
> > > sucks). ANyway, the easy option was the rubber hose, but of course you
> know
> > > that's not it, it's pinholes in the corroded steel line instead. SO is
> this a
> > > dealer part? and how much, or could I maybe get it from
> Potterman/Adirondack?
> > > And how many millions? Any tips for removal and reinstallation would
be
> > > appreciated, it's Canada Day today so I can't do much regardless. I
> don't
> even
> > > know what to call the part,  to tell you the truth. So any advice is
> welcome,
> > > I think I'll spring for a new one, but LMK what other cars have a
> compatible
> > > line setup. This car, it needs way too much attention, I tell you.
Again
> it
> > > chose to spew coolant within a mile of home, thankfully. It always has
> known
> > > where to die.
> > > Cathy
> > >
> > >
> > >
> > > _______________________________________________
> > > Scirocco-l mailing list
> > > Scirocco-l@scirocco.org
> > > http://neubayern.net/mailman/listinfo/scirocco-l
> > >
> >
> > --
> > /=============================================\
> > |  84 Wolfsburg Edition TurboDiesel Scirocco  |
> > |    http://scirocco.cs.uoguelph.ca/gtd       |
> > \=============================================/
> >
> >
> > _______________________________________________
> > Scirocco-l mailing list
> > Scirocco-l@scirocco.org
> > http://neubayern.net/mailman/listinfo/scirocco-l
> >
>
>
>
>
> _______________________________________________
> Scirocco-l mailing list
> Scirocco-l@scirocco.org
> http://neubayern.net/mailman/listinfo/scirocco-l
>
>
>
> _______________________________________________
> Scirocco-l mailing list
> Scirocco-l@scirocco.org
> http://neubayern.net/mailman/listinfo/scirocco-l