will g60 steering knuckles bolt up to my rocco1???

[nealtovsen@yahoo.com (Neal Tovsen)]

G60 wheels are 4-lug (though VR6 are 5-lug). But no,
the spindles will not bolt-up, and I agree that there
would be no performance advantage to doing so. Our
cars aren't heavy enough to need 5 lugs.

One thing I'm not sure of: I know the G60 axles are
the same as the 100mm axles on an A1, but I don't know
if the hubs/bearings are the same. If you wanted to go
with 5-lug wheels (which you might for cosmetic
reasons if your favorite wheel isn't available in
4x100 or something), could you use the VR6 hub in the
A1 spindle/bearing?

Neal


--- Rabbit16v <Rabbit16v@attbi.com> wrote:
> They may but I think the thickness of the piece that
> mounts in the strut is
> different (like an A2).  Why would you want to do
> this anyway?  They are 5
> lug so the gains in not having to adapt the brakes
> to the scirocco setup
> goes away to have to buy 5 lug wheels, or adapters,
> or new hubs/bearings.
> Just curious!
> 
> Dave
> ----- Original Message -----
> From: <JCJJCC@aol.com>
> To: <scirocco-l@scirocco.org>
> Sent: Tuesday, January 21, 2003 10:31 PM
> Subject: will g60 steering knuckles bolt up to my
> rocco1???
> 
> 
> > i have the whole g60 setup from my gti and i would
> liek to put it to good
> > use. i know about the adapters, but i would rather
> just do the whole g60
> > thing. any info is appreciated.   thanks, L.J.  ;)
> >
> 
> 
> _______________________________________________
> Scirocco-l mailing list
> Scirocco-l@scirocco.org
> http://neubayern.net/mailman/listinfo/scirocco-l


__________________________________________________
Do you Yahoo!?
Yahoo! Mail Plus - Powerful. Affordable. Sign up now.
http://mailplus.yahoo.com