2.0 TB

[green536@hotmail.com (Chris DeLong)]

I would be very interested to see a pic of a restrictor in a 16v TB. And AFA 
the bore dimensions that he was referring to they are the same.



Chris DeLong
ICQ#45030867
Seattle, WA USA
'80 16V 'Rocco ragtop
'91 GLi 2.0 16V (for sale)
'77 Rabbit 16V
'61 17 Window type II
'91 Vanagon
'84 Jetta





>From: "Rabbit16v" <Rabbit16v@attbi.com>
>To: "Scirocco List" <scirocco-l@scirocco.org>
>Subject: Re: 2.0 TB
>Date: Sat, 18 Jan 2003 21:40:34 -0800
>
>Actually, Chris,they aren't.  Have you checked out the 2.0L 16v TBs?  They
>aren't the same as I have two very different examples here now.  One is one
>piece and one has a restrictor in the secondary.  Check it out.  If you
>don't have any examples I can send you some pics.
>
>Dave
>----- Original Message -----
>From: "Chris DeLong" <green536@hotmail.com>
>To: <Rabbit16v@attbi.com>; <scirocco-l@scirocco.org>
>Sent: Saturday, January 18, 2003 11:16 AM
>Subject: Re: 2.0 TB
>
>
> > Ummm Dave :D He ws asking about 16V's only. They are the same. Although 
>a
> > 2.0l Auto TB is setup for a TPS and has no port for fuel vapor 
>recycling.
> >
> >
> >
> > Chris DeLong
> > ICQ#45030867
> > Seattle, WA USA
> > '80 16V 'Rocco ragtop
> > '91 GLi 2.0 16V (for sale)
> > '77 Rabbit 16V
> > '61 17 Window type II
> > '91 Vanagon
> > '84 Jetta
> >
> >
> >
> >
> >
> > >From: "Rabbit16v" <Rabbit16v@attbi.com>
> > >To: "Scirocco List" <scirocco-l@scirocco.org>
> > >Subject: Re: 2.0 TB
> > >Date: Sat, 18 Jan 2003 10:50:03 -0800
> > >
> > >The 2.0L TBs are not the same.  Some are the same size but have other
> > >differences and there is atleast one with a restrictor in the primary
>port.
> > >Some are one piece also unlike the 16v and G60 (same base TB).  HTH!
> > >
> > >Dave
> > >----- Original Message -----
> > >From: <JoshuaA.Conner@VerizonWireless.com>
> > >To: <scirocco-l@scirocco.org>
> > >Sent: Saturday, January 18, 2003 10:12 AM
> > >Subject: 2.0 TB
> > >
> > >
> > > > *******NEW TOPIC******
> > > >
> > > > Is the Throttle body on a 2.0 16v the same exact size as it is on 
>the
> > >1.8
> > > > 16v?  I need to know, I am starting to design an intake manifold for
>the
> > > > 16v.  I've started some cad drawings, and eventually it will 
>resemble
>a
> > > > Shrick VR6 manifold.
> > > >
> > > >
> > > > It is the same size.  It differs in that version has a throttle
>position
> > > > sensor.  As a side note i saw in an old European car that the late
>great
> > > > Velocity Tuning once sold a T/B that had the secondary bored 3mm
>larger
> > >with
> > > > a corresponding bigger "flap".  Anyone got any knowledge about 
>these.
> > >Any
> > > > one try boring theirs out?  Seems simple enough eh?
> > > >
> > > > Joshua C.
> > > >
> > > > _______________________________________________
> > > > Scirocco-l mailing list
> > > > Scirocco-l@scirocco.org
> > > > http://neubayern.net/mailman/listinfo/scirocco-l
> > >
> > >
> > >_______________________________________________
> > >Scirocco-l mailing list
> > >Scirocco-l@scirocco.org
> > >http://neubayern.net/mailman/listinfo/scirocco-l
> >
> >
> > _________________________________________________________________
> > Protect your PC - get McAfee.com VirusScan Online
> > http://clinic.mcafee.com/clinic/ibuy/campaign.asp?cid=3963
> >
>
>
>_______________________________________________
>Scirocco-l mailing list
>Scirocco-l@scirocco.org
>http://neubayern.net/mailman/listinfo/scirocco-l


_________________________________________________________________
MSN 8 with e-mail virus protection service: 2 months FREE* 
http://join.msn.com/?page=features/virus