[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Dumb Brake question



use a c-clamps and slowly push it back in


ATS - Patrick Bureau - txrocco@sbcglobal.net


=>-----Original Message-----
=>From: scirocco-l-admin@scirocco.org
=>[mailto:scirocco-l-admin@scirocco.org]On Behalf Of Cory Langford
=>Sent: Saturday, January 11, 2003 6:51 PM
=>To: scirocco-L@scirocco.org
=>Subject: Dumb Brake question
=>
=>
=>
=>Well, I have had a set of 10.1 brakes sitting in the garage forever.  So I
=>finally decided to put them on the Mk1.  Unfortunately when I pulled them
=>out of the box, it seems that the pistons had slid out for some reason.
=>Guess a gravity does work :)
=>
=>So my question is how do you get the pistons back into the caliper?  Just
=>vice it in?  I tried pushing by hand and there is no way it is going in.
=>The pistons are fine. Nice and shiny and smooth.  The seals look good
=>(guess I will find out when I get them back together).
=>
=>Any suggestions?
=>
=>TIA
=>
=>
=>Cory Langford
=>'86 turbo project - running, just needs tuning :)
=>'79 Cheap Ass turbo daily driver - Restore in progress...
=>'65 Ghia - The next project in the garage
=>
=>_______________________________________________
=>Scirocco-l mailing list
=>Scirocco-l@scirocco.org
=>http://neubayern.net/mailman/listinfo/scirocco-l