[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Dumb Brake question



There are no dumb questions, except maybe these. Is there any tubing still
on there? Maybe a crimped steel line? Did you crack the bleeder? Did you try
lubing up the seals with brake fluid? Do you have the piston cocked in the
bore?

Good luck,

Rick Alexander

----- Original Message -----
From: "Cory Langford" <corylang@dccnet.com>
To: <scirocco-L@scirocco.org>
Sent: Saturday, January 11, 2003 7:50 PM
Subject: Dumb Brake question


>
> Well, I have had a set of 10.1 brakes sitting in the garage forever.  So I
> finally decided to put them on the Mk1.  Unfortunately when I pulled them
> out of the box, it seems that the pistons had slid out for some reason.
> Guess a gravity does work :)
>
> So my question is how do you get the pistons back into the caliper?  Just
> vice it in?  I tried pushing by hand and there is no way it is going in.
> The pistons are fine. Nice and shiny and smooth.  The seals look good
> (guess I will find out when I get them back together).
>
> Any suggestions?
>
> TIA
>
>
> Cory Langford
> '86 turbo project - running, just needs tuning :)
> '79 Cheap Ass turbo daily driver - Restore in progress...
> '65 Ghia - The next project in the garage
>
> _______________________________________________
> Scirocco-l mailing list
> Scirocco-l@scirocco.org
> http://neubayern.net/mailman/listinfo/scirocco-l