durability of JH block internals and going turbo

[BHonnold@pac-cap.com (Brian Honnold)]

The technique for supplying oil to the wrist pin by drilling "up" the =
rod is in fact known by everyone as Rifle Drilling.

Hence the language in the link Marc referenced:=20

"Pauter offers the option to "rifle drill" the rods so that the wrist =
pin is fed pressurized oil directly from the rod bearing."

Brian Honnold
Vice President Multifamily Acquisitions
Pacific Capital Investments
Phone:  916.773.3300
Fax:  916.773.3208


> -----Original Message-----
> From: scirocco-l-admin@scirocco.org
> [mailto:scirocco-l-admin@scirocco.org]On Behalf Of L F
> Sent: Wednesday, October 30, 2002 4:53 PM
> To: Marc scirocco Qu=E9bec; scirocco-l@scirocco.org
> Subject: Re: durability of JH block internals and going turbo
>=20
>=20
> Marc-
>   By the way, it's not called rifle drilling, it's known as=20
> gun drilling.
> (and you wouldn't need to gun drill the rods anyway....)
> Larry
>=20
> > This:
> > <<http://e30m3performance.com/installs/2.5_rebuild/rods/rods2.htm>>
> > "to "rifle drill" the rods so that the wrist pin is
> > fed pressurized oil directly from the rod bearing"
> >
> > Cheers.
> >
> > Marc
>=20
>=20
> ---------------------------------------------
> Introducing NetZero Long Distance
> 1st month Free!
> Sign up today at: www.netzerolongdistance.com
>=20
> _______________________________________________
> Scirocco-l mailing list
> Scirocco-l@scirocco.org
> http://neubayern.net/mailman/listinfo/scirocco-l
>=20