Scirocco Hell ... AGAIN !!

[aculda@cogeco.ca (Adrian C.)]

i have about 7 or 8 of those elbows ..
so it dont really matter ...
and its already done anyway ..
i removed the botom sensor ..
Black top ...
Latter

----- Original Message -----
From: "Scott Rose" <slash2@mindspring.com>
To: <scirocco-l@scirocco.org>
Sent: Tuesday, October 01, 2002 4:06 PM
Subject: Re: Scirocco Hell ... AGAIN !!


> Instead of hogging out for the blue temp sensor.  Do this:
>
> 1.   Get the snorkel that the sensor is in and bolt that up
>
> 2.   Check and see what resistance the sensor is that's in there, and see
> if it'll work
>
>
>
>
> At 07:01 AM 10/1/02 -0400, you wrote:
> >   Hey guys ... What i just thought its gonna be an easy digi  conversion
> >turned out to be HELL all over again ... Here's the story ... i got
really
> >pissed at my car for hunting for idle  like mad and decided to go ahead
and
> >swap the digi 1 setup that i have here  ...  CIS junk .. i moved both the
> >fuel line and fuel return line  onto the pasagers side along with the
> >relocated filter I bought earlier the Vibrant Silicone hoses a while
back
> >and now i finaly have a use for them ... :P at this point i have 2 things
> >left to do  ... pull the bottom coolant temp sensor from the old  CIS-E
and
> >mill out a bigger hole and press in the Blue temp sensor  and pul the old
> >injector boses and replace them  with the new ones from a PG ( BIG
MISTAKE
> >) so i get 3 of them out and the last one woulnt  budge even if my life
> >depende on it ... i was like what the heck lets put a  breaker bar on the
> >end of the allen wrench and get snapin at it .. weit it came out .. along
> >with a nice chung out of  the head ... DAMMIT !! ohh well .. i headed out
> >to my other parts car and  took off the head ( from which all the bosses
> >came out no problem whatsoever  ... but while its out im gonna send it
out
> >and get it  cleaned up a bit ( acid dip ) and then do a lil work on it
> >while its out ...  ;) ( a lil port and polish, 3 angle valve job  ) and
do
> >u guys know if the ABA or the PG metal head  gasket will fit on the JH's
??
> >anyways .. i will post pictures as soon asi get a hold of my  friend matt
> >and his camera .. TTL all .. now ... bedtime ..       Adrian C.
> >Gear-Head Performance
> >http://home.cogeco.ca/~aculda/Gear%20Head.htm
> >85  Slegato ( soon G60 Turbo )
> >92 Passat GL ( 2L 16V - Winter Beater  )
> Scott Rose
> 88 red 16v
> 78 "sky blue"
> 90 yellow g60(not too much left now)
> Import R  "solid shift" linkages for VW A1 chassis
>
> _______________________________________________
> Scirocco-l mailing list
> Scirocco-l@scirocco.org
> http://neubayern.net/mailman/listinfo/scirocco-l