[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

broken bearing from tranny



Not a bearing, just the brass bushing from the factory "mini-slip."  
They break all the time, believe me.  New ones are pretty cheap but I
use old ones that happen to be whole.  No biggie.

Ron

--- Tony Morehead <wolfsburg16v2k2@yahoo.com> wrote:
> 
> still workin on the agb tranny.  pulled off the driver's side flange
> (that the inner cv connects to) so i could replace the oil seal. 
> when i looked inside the transmission i found 3 small pieces of brass
> laying in the bottom.  these pieces fit together nicely to form what
> i believe to be a bearing.  the piece seems to slide onto the shaft
> and into a nice little area next to the differential.  my question is
> what is this piece called and what is the part number for it, so that
> i might replace it while i have the thing apart.
> 
> here's what it looks like and an idea of size (because my hand is in
> the picture):
> 
> http://www.geocities.com/three_oaks_kennel/Tony/brokenbearing.jpg
> 
> tia,
> 
> -tony
> 
> 
> 1987 2 or 3 tone 16v scirocco
> 
> 
> ---------------------------------
> Do you Yahoo!?
> Yahoo! Mail Plus - Powerful. Affordable. Sign up now


=====
Cheapass Ron
'87 Scirocco 16'Victor'

__________________________________________________
Do you Yahoo!?
Yahoo! Mail Plus – Powerful. Affordable. Sign up now.
http://mailplus.yahoo.com