euro light ?

[pbureau@attbi.com (ATS - Patrick Bureau)]

heheh I was going to argue with our proud than.. but decided to let the
subject drop
to each their own, My setup might not look exactly like stock wirring, but I
used the other 100$ saved on something else on the car.

Patrick

=>-----Original Message-----
=>From: scirocco-l-admin@scirocco.org
=>[mailto:scirocco-l-admin@scirocco.org]On Behalf Of Lord Xenu
=>Sent: Sunday, March 24, 2002 7:54 PM
=>To: scirocco-l@scirocco.org
=>Subject: Re: euro light ?
=>
=>
=>On Sun, Mar 24, 2002 at 07:08:40PM -0600, Donald Walter wrote:
=>
=>> Patrick, you are not.  but I will tell you that you will never
=>home build a
=>> harness that looks as clean and like a factory install as the
=>one from ND.
=>
=>I FAR disgree..  You may not be able to do this, but I certainly can.  On
=>my system, the relays are in a waterproof enclosure, so the contacts don't
=>corrode.  I used 4 relays instead of 2, and have 4 resettable circuit
=>breakers.  I used marine grade, 10-ga wire, in the stock factory
=>colors.  I used really nice bakelite H4 connectors from NAPA, which I was
=>able to desolder the original wire from and solder my 10-ga wire to.  All
=>in all, I spent around $50 to get a better looking better engineered
=>system.
=>
=>
=>Dan
=>
=>
=>_______________________________________________
=>Scirocco-l mailing list
=>Scirocco-l@scirocco.org
=>http://neubayern.net/mailman/listinfo/scirocco-l