[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Fw: I hate my shifter



Before you go out and spend big bucks for heim style links- you might want to 
consider using the same rod ends that TSR uses for their linkage kits. These 
can be purchased from McMaster-Carr part #9416K87 for $2.25 ea. They will 
install straight over the existing VW 13mm linkage ball.  In order to replace 
the bushed ends of the long shift rod- you'll need to buy the 13mm ball 
studs- part #9512K83 at $1.13 per.

In order to lock it all down, it is necessary to buy the safety wire clips- 
#9416K82  $3.13 pkg of ten.

You can put together an EXACT clone of the TSR linkage for much less than 
$25...

(Wish I'd known this last year before the TSR group buys...)

McMaster is on the net at:  <www.mcmaster.com>  their sales phone is 
(562)692-5911

HTH somebody,

Danny


In a message dated 3/17/02 7:41:22 PM Pacific Standard Time, 
rick@brubakerbox.com writes:

<< I don't hate my shifter. In fact it works well. However since I have 
linkage
 experience, I've been thinking of building a linkage with Heim joints for a
 more positive feel as well as greater longevity (they do live in a terrible
 environment).
 
 Volkswagen probably did not produce our shifters in this way due to cost
 and/or production troubles.
 
 My questions are:
 Has anyone else tried this and what were the results?
 Other than WaspHwy@aol (no sig), is there any other interest in this
 modification if I were to produce it?
 
 Rick Alexander
 http://www.brubakerbox.com
 http://clubs.hemmings.com/hams/
 http://clubs.hemmings.com/vwsrus/
 
 > ----- Original Message -----
 > From: <WaspHwy@aol.com>
 > To: <scirocco-l@scirocco.org>
 > Cc: <mk1gti@egroups.com>
 > Sent: Sunday, March 17, 2002 3:56 PM
 > Subject: I hate my shifter
 >
 >
 > > this is the one thing about vw's that I cant stand. my shifter, even
 with
 > a
 > > tt short shift kit and a bushing kit, still feels like shite. I can
 hardly
 > > every find 1st and in general, feels like a stick in a bucket of grease.
 I
 > > have noticed that there are some bushings not included in a kit, more
 > > specifically, the rubber bushing in a plate that the main shift rod (the
 > one
 > > that goes from the shifter to the engine compartment) goes through. what
 > > about a solid linkage kit? the ones with spherical ends and such. will
 > this
 > > cure my woes? any ideas? tia
 > > >>