[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Need help identifying part



Nope just the shift indicator it was on the 86 and 87 16v they dud awy with 
it on the 88.

Brian


>From: "Wes Brockway" <KYWes@hotmail.com>
>To: "'ATS - Patrick Bureau'" <pbureau@attbi.com>, <scirocco-l@scirocco.org>
>Subject: RE: Need help identifying part
>Date: Wed, 6 Mar 2002 23:31:57 -0500
>
>I appreciate the help and the picture, however, I am wondering if this
>part was used in another capacity as the picture you attached shows for
>an 8v with K-Jetronic fuel. I have a 16V and CIS-E fuel? Does the EKTA
>have two entries for this part?
>
>-----Original Message-----
>From: ATS - Patrick Bureau [mailto:pbureau@attbi.com]
>Sent: Wednesday, March 06, 2002 11:18 PM
>To: Wes Brockway; scirocco-l@scirocco.org
>Subject: RE: Need help identifying part
>
>
>Here I join an attached picture of the item per say (item 21 on the
>picture.)
>
>Patrick
>
>-----Original Message-----
>From: Wes Brockway [mailto:KYWes@hotmail.com]
>Sent: Wednesday, March 06, 2002 10:02 PM
>To: 'ATS - Patrick Bureau'; scirocco-l@scirocco.org
>Subject: RE: Need help identifying part
>
>
>Ok, thanks. So it has a vacumn connection to the tranny and an
>electrical connection? Or does the vacumn go somewhere on the engine and
>the electrical to the tranny? I don't care about nor want to upshift
>indicator I am just concerned about having a vacumn port open.
>
>-----Original Message-----
>From: scirocco-l-admin@scirocco.org
>[mailto:scirocco-l-admin@scirocco.org] On Behalf Of ATS - Patrick Bureau
>Sent: Wednesday, March 06, 2002 10:33 PM
>To: Wes Brockway; scirocco-l@scirocco.org
>Subject: RE: Need help identifying part
>
>
>171-919-825-B Vacuum Switch for vehicules with upshiftlight and
>consumption indicator.
>connects to the side of the tranny.
>
>-----Original Message-----
>From: scirocco-l-admin@scirocco.org
>[mailto:scirocco-l-admin@scirocco.org]On Behalf Of Wes Brockway
>Sent: Wednesday, March 06, 2002 8:43 PM
>To: scirocco-l@scirocco.org
>Subject: Need help identifying part
>
>
>While checling out my 87 Roc yesterday I came across a part that is just
>hanging loose. It has the VW part # on it of 171919825 B and according
>to the Bentley it is involved in the cold enrichment circuit. It is a
>black assembly about the size of a half-dollar with a yellow middle that
>looks to be adjustable with a scredriver. It has two vacumn hoses coming
>off of it. One is about 2 inches long and I have no idea where it goes.
>I don't see an unused vacumn port. The other vacumn line is long and
>disappears into the driver's side fender near the battery. There is a
>two wire connection coming off of it that at the present is not going
>anywhere.
>
>I should say this an '89 engine in an 86 rocco body.
>
>Would appreciate help knowing what to do with this assembly. I can email
>a picture if that would help. I think I found the part in the Bentley
>but it looks like they have it on an 8v motor so I can't see where it
>should go. However, the book says this part is only found on July 87 and
>newer motors.
>
>Wes
>


_________________________________________________________________
Chat with friends online, try MSN Messenger: http://messenger.msn.com