[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

1-3 gears I'm all over the place!



Mark-
  Your solution sounds interesting.  And it should work as long as the
"short, intermediate shaft" is about 2" in diameter, with at least
eighth-inch wall thickness.  In other words, it cannot twist/torque or all
your work will be for naught.

Larry  sandiego16V


I've been thinking of fabricating up a short "straight"
> intermediate shaft for the passenger side, which couples to a second
> driver side half shaft.  That way both axles will be the same length,
> and should (?) eliminate most of the torque steer felt in a high HP
> front driver

----------------------------------------------------
Sign Up for NetZero Platinum Today
Only $9.95 per month!
http://my.netzero.net/s/signup?r=platinum&refcd=PT97